ACCUREX Turbilatex RF 50
Buy Infinite Liquid Turbilatex RF 50 Diagnostic Reagent (R1 1 X 45ml: R2 1 X 5ml: CAL 1 X 2ml) from Accurex. Turbilatex RF reagent kit is used for determination of Rheumatoid Factors (RA in human serum based on Turbidimetric method).
Turbilatex RF is a two liquid reagent system using one step procedure & can be determined in just 2 minutes. Accurex Turbilatex ASO Reagent kit should be stored at 2- 8C & is stable till the expiry.
- 100% after sales service.
- 7 Day Replacement Policy
- Hassel Free Cancellations
- Cash On delivery
- Minimum 6 Months of Shelf life (Applicable on Reagent, Chemical & Kits)
Description
- Infinite Turbilatex RF is a reagent set for quantitative determination of Rheumatoid Factors (RA in human serum based on Turbidimetric method.
- Fafinite Turbilatex RF is a two liquid reagent system using one step procedure.
- Infinite Turbilatex RF can be determined in just 2 minutes
- Infinite Turbilatex RF is linear upto 160 IU/ml
- Infinite Turbilatex RF can be used on any Spectrophotometer,
semi-automated and automated analyzer.
Infinite Turbilatex RF contain latex particles coated with human
gamma globulin which reacts with RF in the sample resulting in
agglutination, Agglutination causes change in absorbance, measured at 650 nm (600 -650 nm) & is proportional to the concentration of RF in the sample.
Reaction type …………. …………….Fixed-Point
Reaction direction ………………..Increasing
Wavelength ……………..540 nm.
Flow Cell temp…………………………..37°C
Zero setting with ……..………. Distilled Water
Delay time ……………………………….5 sec
No. of readings …………………………………2
Interval …. …. ………….120 sec
Sample volume …………………….5 pl
Working solution volume (4R1+1R2) ……………………..1.0 ml a
Linearity.……………150 mg/L
The reagent kit should be stored at 2 – 8 C and is stable til the expiry
date indicated on the label. It is recommended to store the reagents at 2°- 8° C, tightly closed after use.
The working solution (9R1 + 1R2) is stable for 30 days at 2°-8°C.
DO NOT FREEZE THE REAGENTS. Frozen Latex or Diluent could
change the functionality of the test.
Contamination of the reagents should be strictly avoided.
Reconstituted calibrator is stable for 1 month at 2-8C or 3 months at – 20°C.











Reviews
There are no reviews yet.